|
1963-1967 Chevrolet C2 Corvette
1963 - 1967
C2 Corvette Hydraulic Brake Assist System
-
Factory equipped with manual or power brake
–
DIRECT BOLT IN UPGRADE SYSTEM !
-
This part number
fits the early design / deep style master
cylinder only,
per its longer master
cylinder
pushrod (see
illustration below)
-
All engines with factory installed power steering
or Steeroids Rack and Pinion Conversion System
-
Recommended for use with twin piston master
cylinder and disc brakes, though may also be
successfully installed onto the early original
drum brake models
-
Features an adjustable brake pedal rod to allow
for a range of brake pedal height adjustment
-
May be necessary in some cases to lengthen brake
lines to the master cylinder -
brake line materials not included.
_______________________
1963 - 1967
C2 Corvette Hydraulic Brake Assist System
- Factory equipped with manual or power brake
-
This part number
fits the later design / shallow style master
cylinder only,
per its shorter
master cylinder
pushrod (see
illustration below)
-
All engines with factory installed power steering
or Steeroids Rack and Pinion Conversion System
-
Recommended for use with twin piston master
cylinder and disc brakes, though may also be
successfully installed onto the early original
drum brake models
-
Features an adjustable brake pedal rod to allow
for a range of brake pedal height adjustment
-
May be necessary in some cases to lengthen brake
lines to the master cylinder -
brake line materials not included.
*GM
deep vs. shallow master cylinder design:
Note: The ’76 and earlier Corvette used the
deep style master cylinder shown on the left,
while the ’77 and later C3 models used the shallow
style shown on the right. The ’97-’02 C5 Corvette
master cylinder will also directly fit Part # 3003
if desired.
 |
